1Upload the FLAC audio files whose level you want to change.
2Set a gain in decibels or as a percentage — positive to boost, negative to bring it down.
3Run it; headroom is checked first, so a boost that would clip is flagged rather than silently squared off.
4Download the adjusted FLAC file.
Adjust FLAC Volume FAQ
Will boosting the volume distort the audio?
+
Only if it clips. Headroom is checked before the file is written, so a boost that would push peaks past full scale is flagged rather than silently squared off. If the recording is quiet because it is noisy, boosting raises the noise too.
Does the source format matter?
+
It does. FLAC is lossless compression — bit-identical to the source on decode, at about half the size of WAV. That decides whether a gain change is an exact edit of the samples or has to go through a re-encode.
Should I use volume or normalisation?
+
Use volume when you know exactly how much louder or quieter you want it. Use normalisation when you want a set of files to end up at the same perceived loudness — that is a measurement problem, not a fixed gain, and applying one when you meant the other is the usual mistake.
Can I adjust a whole batch to the same gain?
+
Yes, though be careful what you are asking for: the same gain on files recorded at different levels keeps them at different levels. If you want them to match, normalise instead.
Will Adjust FLAC Volume lower the quality of my FLAC audio files?
+
No. Lossless audio is edited sample-exactly, so what comes back decodes bit-identically to what you would get doing the same edit in a desktop editor. You can repeat the cycle as many times as you like without accumulating any loss at all.
Are bit depth and sample rate preserved?
+
Yes, unless you change them deliberately. A 24-bit/96 kHz source stays 24-bit/96 kHz — nothing is silently downsampled to 16/44.1, which is the failure mode that makes a master unusable.
Does Adjust FLAC Volume cost anything?
+
No. Adjust FLAC Volume is free with no account required, and nothing is added to the audio. Uploads are deleted from the workers shortly after the job finishes.
What can I upload to Adjust FLAC Volume?
+
WAV, FLAC and AIFF, at any bit depth and sample rate up to and including 24-bit/192 kHz. Lossy files work in the same batch if you are mixing sources.
Why does a PDF site host Adjust FLAC Volume?
+
PDF.to exists because PDF is where documents go to be shared and the worst place to keep them while they are still being worked on, so nearly every job here is about getting something into or out of that state deliberately. A document rarely arrives in the state it needs to leave in: it is too big, in the wrong order, locked, or a scan with no text in it. Adjust FLAC Volume sits on the same upload and the same account as the conversions because those jobs turn up together.
What should I do with the result once Adjust FLAC Volume is finished?
+
The converter on this site moves documents between PDF, Word, images, plain text and eBook formats in either direction, so whatever comes out of a tool here has somewhere to go next without a second upload. Running that after Adjust FLAC Volume rather than before keeps the document structure intact through the step that is most likely to flatten it.
Is Adjust FLAC Volume here the same tool the sibling sites run?
+
The engines are shared — the same document toolchain, the same workers, the same limits. What a PDF site adds is a view on when a file should stay a document and when it genuinely wants to become something else, which is the decision most tools quietly make for you. It also starts from one fact about the format this site is named after: a PDF is an object graph, not a page image, so text stays selectable and vectors stay sharp no matter what happens to the raster content inside it.
Do I need an account, and does anything get kept?
+
No account, and nothing is kept: uploads are deleted from the workers shortly after the job finishes, nothing is read and nothing is indexed. Free accounts exist for history and batch size, not for access.
